|
Lyman Sights and Cutts
Compensators |
||||||||||||||||||||||||||||
Upgrade Your Muzzleloader with fits most European Imported Muzzleloaders
Lyman's new Eyeglass Diopter instantly improves eye focus
for shooters with prescription glasses. Eliminates target fuzzing and
distortion. Mounts directly to the eyeglass lens, rubber suction cup will
not scratch lens. It is the ideal product for shooters whose eyes simply
don't focus the way they used to.
Lyman has recreated the sight that the Lyman Gun Sight Company was founded on in 1878. Reintroduced in 1994 for the Winchester 94 Centennial, the No. 2 Tang will fit most new and old 94 models plus these other historic Winchester Models: 1885, 1887, 1890, and 1894. (The No. 2 will also fit other models when adjusted to full height). For 1995, Lyman introduced a new version of the No. 2 Tang for Marlin Models 336, 1894, 1895 and 30 series lever action rifles. Like the original, the No. 2 is all steel construction and features height index marks on the aperture post, with a maximum elevation of .800 for long range shooting. It includes both a .093 quick sighting hunting aperture and a .040 Large Disk Target Aperture. Also included is a replacement rear stock screw and front tang screw. (Marlin version features a special adapter which allows mounting on the tang without damaging the serial number) When mounted, the No. 2 Tang Sight’s greater sight radius means as much as 32% greater inherent accuracy at 100 yards. It provides a clear view of the target and front sight and can be used when the light is too dim for other sights. No. 2 Tang Sight (Winchester) Item #3902094 New: No. 2 Tang Sight (Marlin) Item #3902100 (Marlin version includes adapter base)
Click here for replacement #2 Tang Sight Apertures and Mounting Screws
The Lyman 1886 #2 Tang Sight The legendary Lyman #2 Tang Sight is now available for the
Winchester 1886 lever action rifle. It fits the original Winchester model 1886 and
Browning replicas. Features include height index marks on the aperture post and an .800
maximum elevation adjustment. Also included is a .093 x 1/2" quick-sighting aperture
and .040 x 5/8" target disk. Mounting screws and instructions are included. Note:
does not fit new rifles with Tang safety.
Click here for replacement #2 Tang Sight Apertures and Mounting Screws
Lyman 57 and 66 Receiver “Peep” Sights The 66 is for flat receivers, such as lever action rifles, like the Winchester 94, Marlin 336 or modern shotguns. Features include 1/4 minute audible click micrometer adjustments for
elevation and windage, quick-release slide, coin-slotted “stayset” knobs and two
interchangeable aperture discs (large hunting aperture and small target aperture) for any
shooting condition.
Model 57 Receiver Sights
Model 66 Receiver Sights
66 WB Receiver Sight for 1886 With the re-introduction of the Winchester and Browning Models of
the 1886 Winchester Lever Action came requests for a receiver sight for more precise
aiming. The new 66WB features 1/4 minute audible clicks for windage and elevation and new
semi-target knobs for precise adjustments. It is supplied with hunting and target aperture
disks and quick release slide.
Click here for 57 Receiver Sight Replacement Parts Click here for 66 Receiver Sight Replacement Parts
Replacement Sight Discs Fits current and older Lyman Receiver
Sights. Item #3060964 5/8 x .040 Standard target disc
90 MJT Target Receiver Sight This sight is designed to mount on Lyman and other mounting bases
available for most 22 bolt action rifles. It features audible click detent – target
knobs scribed in quarter minute graduations – elevation and windage arrows.
Adjustable zero scales and elevation stop screw permit instantaneous return to zero. Quick
release slide allows slide to be removed with a press of the release button. Large
7/8" non glare .040 aperture. Elevation adjustable from 1.060 to 1.560 above bore
centerline.
Click here for replacement parts for the 90MJT Receiver Sight
Mounting Bases 540 for 1" receivers Item #3902085
93 Match Globe Front Sight The 93 Match Globe Front Sight has been designed to fit any rifle.
The 93 match sight (7/8" diameter) mounts on a standard dovetail base, available from other sources. It is supplied with seven Anschutz size inserts. The sight height is .550 from the top of the dovetail to the center
of the aperture. Hooked locking bolt and nut provide a positive installation while
allowing quick removal. Accepts most Anschutz accessories.
Globe Front Sights
20 MJT-20 LJT Globe Front Sights The 20 MJT – 7/8" diameter Globe Front Sights is machined from one solid piece of steel designed to be mounted in a 3/8" barrel dovetail or dovetail base. 20 MJT height .700", from the bottom of dovetail to the aperture center supplied with seven Anschutz size steel apertures(see below for sizes). 20 MJT (3 oz.) Item #3201150
For 20 MJT-LJT, 93 MATCH includes Anschutz size inserts.
Series 17A Target Front Sights 17 A Target Sights are machined from a solid piece of steel and are designed to be mounted in 3/8"dovetail slots. They are supplied with eight interchangeable inserts (see photo and description) that are locked in place with a threaded cap. Sight Heights* 17 AHB .404 17AMI .494 17AUG .584 *from bottom of dovetail to center of aperture. (1 oz.) Series 17A Target Front Sight, with Insert Set.
Series 17A Insert Set Set includes two post-type inserts, (.050 and .100 wide), one bead insert (.062) and five aperture-type inserts, (One plastic insert with .120 hole and four steel inserts with .093, .102, .110 and .120 holes). (1 oz.) Item #3171086
No. 16 Folding Leaf Sight This open rear sight with adjustable elevation blade, is the perfect auxiliary sight for scope-mounted rifles. Folds close to the barrel when not in use. Designed to fit 3/8" dovetail slots. Available in three models – 16A, .400 high, elevates to
.500;16B, .345 high, elevates to .445; and 16C, .500 high, elevates to .600.
Hunting Front Sights The #3 and #28 are identical and designed to be mounted into the
barrel dovetail. The #31 and #37 are designed to mount on ramps. #3 and #31 have
1/16” bead. #28 and #37 have 3/32” bead availability in ivory or gold.
Click on order button for height and availability.
12S Slot Blank Fills standard 3/8" dovetail cut in the barrel when a sight is removed. Protects dovetail from damage. Item #3121040
Lyman Shotgun Sights Lyman Shotgun Sights are equipped with oversized ivory-like beads, which are easy to see under any light conditions and can be fitted in minutes. No. 10
Front Sights (press fit) – For use on double barrel, or ribbed single barrel guns.
No. 10D Front Sights (screw fit)– For use on non-ribbed single barrel guns. These
sights are supplied with a wrench.
No. 11 Middle Sight (press fit) – This small middle sight is intended for use on
double and ribbed single barrel guns.
The Cutts Compensator system requires installation by a qualified gunsmith. See chart below for reference. 12 Gauge Chokes & Accessories Note: Effective 1/1/08 the Cutts Compensator line of products has been discontinued. Inquiries on remaining Cutts accessories should be directed to Brownell's at 1-800-741-0015 or to www.brownells.com
|
.gif){kind=small}
